The highest requirements of small to medium-sized farms are met in full by our HIT mounted Tedders. Designed for all forage types, these machines provide you with optimum distribution quality and perfect crop take-up.

Very short headstock with stabiliser struts

HIT tedders are especially noticeable for their short headstock. Consequently, the centre of gravity is moved closer to the tractor. The pivoting headstock with a heart-shaped pivot pin brings the machine into the centre position when it is raised. The vertical point of rotation reliably prevents under-running when working downhill and guarantees high lifting clearance at the headland. Two double-acting stabiliser struts ensure the best possible centering so that the machine runs smoothly at the same inclination as the tractor. You will notice the benefit of this system, especially when working on slopes.

Equipped for all operating conditions

• Tedders with pivoting headstocks follow in the tractor's tracks without swivelling out.
• The pivoting headstock with a heart-shaped pivot pin brings the machine into the centre position when it is raised.
• A slotted hole is provided for operation with a jockey wheel and rigid top link.
• The transport interlock enhances safety on the road.

MULTITAST jockey wheel

The proven PÖTTINGER MULTITAST jockey wheel system keeps your forage clean and conserves the sward. The optional jockey wheel on the pivoting headstock tracks the ground immediately in front of the tine path and responds to each undulation. You are now able to drive faster and can achieve a higher output as a result. The sward is protected and the tines last much longer. The additional jockey wheel is especially recommended for working on slopes.

• The top link connects to the slotted hole on the headstock.
• The height can be adjusted without the need for tools.
• Once set, the working height does not have to be re-adjusted again. This is an advantage if the machine is frequently attached and detatched from the tractor or if there is a change of drivers.

Four times cleaner with DYNATECH

• Forage pick-up – small rotor diameters guarantee clean crop pick-up
• Forage – optimum ground tracking of each rotor for clean forage
• Spread pattern – ideal spreading angle for a uniform blanket of clean forage
• Machine – no snagging thanks to the sleek design of the rotor units

The best spreading quality thanks to swept tine arms

The unique swept-back tine arms guarantee a tidy spread pattern. As a result the tines move in a sweeping action to handle the forage softly. The swept shape of the tine arms prevents forage from building up and wrapping around the rotors. High performance is built in to our mounted and trailed HIT tedders.

Clean forage thanks to offset tine lengths

Offset tine lengths pick up the forage uniformly and contribute significantly to improved tedding quality. Two angles of inclination can be set by turning the mounting through 180°. This guarantees the cleanest forage and optimum working quality in all operating conditions.

Adaptable for clean results

The rotors can be set in five different positions without the need for tools (three settings on HIT 16.18 T). You can adapt the rotors to the forage conditions quickly and easily. A uniform and tidy spread pattern is ensured as a result.