Servo 35

Type: Medium Duty Mounted Reversible Plough
Number of Bodies Available: 3 - 4 - 5

SERVO 35 / 35 S

For tractors up to 170 hp

The size of tractor used on medium-sized arable farms continues to increase, so demands on the plough also continue to grow. The SERVO 35 range up to 140 hp matches this segment. For tractors up to 170 hp, the SERVO 35 S range featuring the more robust turnover mechanism is an ideal match.

For the toughest jobs

The inside of the full-length micro-alloyed fine-grain steel plough beam tube is strengthened by two bolted reinforcements. This technology is unique on the market.  

  • Maximum plough beam rigidity at the point of maximum bending stress.
  • The inner web increases resistance to flexing by up to 25 %.
  • The firm seating of the bolted reinforcement forms a high-strength unit.
  • No through bolts that could work loose. Secured using Nord-Lock washers

Intelligent solution

The oversized main plough beam bearing extends 1330 mm (2200 mm on SERVO S version) to distribute forces acting on the beam up to well beyond the second body. The thick walls of the plough beam tube provide a secure seat for mounting plough legs and skims.

Headstock

  •  Double acting reversing cylinder with check valve; hoses are not under pressure during ploughing.
  • The full-length mounting axle can be adjusted to four positions and has an anti-twist lock. The correct position on the tractor and optimum clearance at all times.

Three top link positions are possible. Including a slotted hole for faster penetration and lower linkage control. The extra-thick top link retention plate is hardened and guarantees a snug fit for the top link pin

Type: Medium Duty Mounted Reversible Plough

Number of Bodies Available: 3 - 4 - 5

Power Requirement: 80 - 140 Hp

Weight: 955 - 1255 Kg

Leg Dimensions: 80 x 30 mm

Beam Dimensions: 120 x 120 mm

Various Board Options Available: Yes

Agree