For tractors up to 240 and 350 hp

Increasingly powerful tractors operate mounted ploughs with more than four furrows. Fast road travel and large inter-body spacing demand a robust headstock, powerful turnover mechanism and box-section plough beam. 

Four top link positions

Including two slotted holes for faster penetration and lower linkage control. The extra-thick top link retention plate is hardened and guarantees a snug fit for the top link pin.

Body holder

The tempered leg mounting brackets have a large clamping surface to resist high stress. The bracket surrounds the plough beam with a large contact area for optimum transfer of forces to the beam.

Headstock

The full-length mounting axle can be adjusted to four positions and has an anti-twist lock. The correct position on the tractor and optimum clearance at all times.

Turnover shaft

• SERVO 45 M diameter 130 mm.
• The reversing unit made from tempered cast steel is not welded to the turnover shaft.
• The hydraulic hoses pass through the hollow shaft preventing trapping of the hoses during reversing.
• The heavy-duty tapered roller bearings are reliably protected from dirt and locked with an adjustable castellated nut.
• The beam angle is adjusted using two turnbuckles.

Headstock SERVO 45 S up to 350 hp

•  The full-length mounting axle can be adjusted to four positions and has an anti-twist lock. Correct positioning on the tractor and optimum clearance at all times.  
• Double mounting axle bearing on SERVO 45 S as option, standard on 6-furrow version.
• One bracket surrounds the plough beam with a large contact area for optimum transfer of forces to the beam.

Three top link positions

Including two slotted holes for faster penetration and lower linkage control. The extra-thick top link retention plate is hardened and guarantees a snug fit for the top link pin